EKF - Short Profile
EKF - Short Profile


CC3-CAJUN

3U, CompactPCI  Advanced Low-Power CPU
HTML documents available here
CC3-CAJUN CPU Board CC3-CAJUN CPU Board Product Description in English
CC6-ACID Companion Board CC6-ACID Companion Board Product Description in English
CC3-CAJUN - the Cool CPU
PDF documents available here
CC3-CAJUN Product Information CC3-CAJUN CPU Board, Product Information in PDF Format - English
CC3-CAJUN User Guide PDF Document, CC3-CAJUN CPU Board User Guide, English
CC6-ACID Product Information CC6-ACID Companion Board, Product Information in PDF Format - English
CC6-ACID Technical Information PDF Document, CC6-ACID Companion Board Technical Information, English
CCY-RIO Technical Information PDF Document, CCY-RIO Rear I/O Transition Module Technical Information Manual, English
Download area for firmware & drivers
Phoenix BIOS
Graphics Drivers & Chipset Software
Embedded Graphics Drivers (WXP)
Embedded Graphics Drivers (W2k)
Ethernet - W2k/NT Intel NDIS Drivers
Ethernet - Other Intel Drivers
Ethernet - Crynwr Open Source
SMB Monitor (EXE)
CPU ID & Clock (EXE)
FreeDOS Boot Diskette
FreeDOS Boot USB Stick
Subscription of the EKF NewsFlash, an E-Mail Letter with Announcements of Firmware and BIOS Updates
E-Mail on BIOS Update Subscription of the EKF NewsFlash, an E-Mail Letter with Announcements of Firmware and BIOS Updates, English
E-Mail bei BIOS Update Abonnement EKF NewsFlash, ein E-Mail Dienst mit Ankündigungen neuer Firmware/BIOS Updates, Deutsch
Download a photo in print quality
Photo Gallery
1 | 2 | 3
Print Quality, 300dpi 10x15cm .JPG

CC3-CAJUN

CompactPCI  Advanced Low-Power CPU
ULV Celeron or LV Pentium III


Alternatively equipped with the Intel® series of ULV Celeron® or LV Pentium® III processors, the CC3-CAJUN is a versatile 4HP/3U (single size Eurocard) CompactPCI® CPU board, designed especially for systems which require very low power consumption.

Available either with the 800/933MHz Low Voltage Pentium III or the 400/650MHz Ultra Low Voltage Celeron processor and up to 512MB RAM, the CC3-CAJUN covers a wide range of applications, including PXI systems.



The DVI-I video interface is suitable for attachment of both, advanced (digital) and legacy (analog) displays (D-SUB connector optionally). The CC3-CAJUN is provided with a 100Mbps Ethernet controller. The on-board CompactFlash socket allows for utilization of an ATA Flash card or IBM Microdrive®.

A local expansion interface connector may be used to directly attach a companion I/O board, which can carry in addition a hard disk drive. As an option, rear I/O across the J2/P2 connector is available.


CC3-CAJUN - the Cool CPU

CC3-CAJUN - the Cool CPU
Feature Summary CC3-CAJUN
Form Factor CompactPCI Single size CompactPCI style Eurocard (160x100mm2), front panel width 4HP (20.3mm)
Processor Designed for Intel® ULV Celeron® and LV Pentium® III Micro FC-BGA processors (Tualatin 0.13µ generation), maximum junction temperature 100°C, processor thermal design power classification:
  • CC3-1: 400MHz ULV Celeron, 0.95V, 100MHz FSB, 256KB L2 cache, 3.4W typical
  • CC3-2: 650MHz ULV Celeron, 1.10V, 100MHz FSB, 256KB L2 cache, 7.0W typical
  • CC3-3: 800MHz LV Pentium 3, 1.15V, 133MHz FSB, 512KB L2 cache, 11.2W typical
  • CC3-4: 933MHz LV Pentium 3, 1.15V, 133MHz FSB, 512KB L2 cache, 12.2W typical
Chipset Intel i815G chip set consisting of:
  • 82815 Graphics/Memory Controller Hub (GMCH)
  • 82801 I/O Controller Hub (ICH2)
  • 82802 Firmware Hub (FWH)
  • 8761 LPC Super I/O
Memory
  • 144-pin SO-DIMM socket
  • Support for up to 512MB, PC133, non ECC, unbuffered SDRAM
  • Support for serial presence detect (SPD) SO-DIMMs
Video
  • Both analog monitor and digital flat-panel display support by DVI-I connector (front panel), up to 1280x1024 pixel 16M colors 85Hz refresh rate, incorporates PanelLink Digital technology (Silicon Image)
  • Option: D-SUB (female HD15) connector available, replaces DVI-I connector
USB Ports over-current protected, data transfer rate of up to 12Mbps, conforming to USB1.1
  • USB port 1: Type A connector (front panel)
  • USB port 2: J2/P2 Rear I/O option
Ethernet 10/100Mbps Fast Ethernet controller, 82551ER chip, RJ45
Serial Port
COM1
  • On-board RS-232E transceiver, RJ45 front panel connector (adapter RJ45 to D-Sub available), transceiver can be disabled if rear I/O COM port option is preferred
  • J2/P2 Rear I/O option (TTL voltage level)
Legacy I/O
  • LPC Super-I/O interface connector, CC6-ACID mezzanine companion board available for top (right) or bottom (left) mounting
  • J2/P2 Rear I/O option: Keyboard, Mouse, COM1 (TTL voltage level)
IDE/ATA
  • Ultra ATA/100 40-pin connector (primary IDE)
  • CompactFlash socket for CFA ATA cards (secondary IDE)
  • J2/P2 Rear I/O option: Primary IDE
CompactPCI  32-bit, 33.3MHz, PCI bridge chip PLX 6150, 133MBps CPCI master
J2/P2
Rear I/O
Option
  • Primary IDE
  • USB Port 2
  • Keyboard, Mouse
  • COM1 (TTL Level)
  • Rear I/O transition module CCY-RIO available
PXI Support TRIG0, TRIG1, TRIG6, TRIG7 (can be alternatively used as GPIO)
BIOS
  • Phoenix BIOS with EKF embedded systems enhancements
  • 8Mbit Flash memory
  • Updates available from website ekf.com
Drivers
(Major OS)
  • Intel graphics drivers
  • Intel networking drivers
Power
Requirements
  • CC3-1-CAJUN: +5V±0.25V 1.3A max.+3.3V±0.1V 1.1A max.
  • CC3-2-CAJUN: +5V±0.25V 1.9A max.+3.3V±0.1V 1.3A max.
Thermal
Conditions

Environmental
Conditions
Processor cooled down by passive heatsink, typical thermal resistance 13.8K/W (natural convection), 4.6K/W (forced airflow @ 200LFM). Custom specific heatsink solutions on request. Maximum ambient operating temperature with standard heatsink:
  • CC3-1: 0-40°C (natural convection cooling), 0-70°C1 (200LFM forced airflow)
  • CC3-2: 0-60°C (200LFM forced airflow), 0-70°C1 (400LFM forced airflow)
  • CC3-3: 0-45°C (200LFM forced airflow), 0-65°C (400LFM forced airflow), 0-70°C1 (600LFM forced airflow)
  • CC3-4 0-40°C (200LFM forced airflow), 0-65°C (400LFM forced airflow), 0-70°C1 (600LFM forced airflow)
1 Limited to 70°C due to other components than the processor
  • Storage temperature -40°C to +85°C, max. gradient 5°C/min
  • Humidity 5% ... 95% RH non condensing
  • Altitude -300m ... +3000m
  • Shock 15g 0.33ms, 6g 6ms
  • Vibration 1g 5-2000Hz
EC Regulations
  • EN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1)
  • 2002/95/EC (RoHS)
MTBF 0.113 * 106h
Typical Performance Rating
Measured with PCMark2002 under Windows 200
Board Processor CPU/MEM Score
CC3-1-CAJUN 400MHz ULV Celeron® 1274/886
CC3-2-CAJUN 650MHz ULV Celeron® 1990/933
CC3-3-CAJUN 800MHz LV Pentium® tbd
CC3-4-CAJUN 933MHz LV Pentium® 2854/1467
Subject to change

CC3-CAJUN - Component Assembly

CC3-CAJUN - Component Assembly (Top View)

CC3-CAJUN - Block Diagram

CC3-CAJUN - Block Diagram


Available as a companion board to the CC3-CAJUN, the CC6-ACID is provided with several legacy I/O ports. This module can be mounted either to the bottom side or on top of the CC3-CAJUN and communicates across the LPC (Low Pin Count) interface.

The CC6-ACID could be useful if the classical interfaces, e.g. serial and parallel ports, are required by a given application.



In addition, the CC6-ACID can be delivered with an on-board 2.5-inch Ultra ATA hard disk drive, resulting in a very compact system. Both COM connectors, LPT, and PS/2 mouse and keyboard are situated at the CC6-ACID front panel (4HP and 8HP versions available).

The CC0-CHILLOUT is similar to the CC6-ACID, but designated for use together with a rear I/O transition module (CCZ-RIO).


CC6-ACID - Block Diagram

CC6-ACID - Block Diagram


Available as a stuffing option, the CC3-CAJUN can be delivered for rear I/O utilization. Several I/O ports can be routed across the J2 connector. Rear I/O requires that a suitable J2 backplane is present in your CompactPCI system. By default, the CC3-CAJUN is equipped with line terminating resistors for a common 64-bit CPCI J2 backplane.


The CCY-RIO transition module provides a 4HP back panel with connectors for PS/2 style keyboard and mouse, a serial RS-232E COM port, and an USB receptacle. In addition, optional on-board headers are provided on the CCY-RIO for internal attachment of IDE/ATA devices (hard disks, optical drives).

CCY-RIO - Block Diagram

CCY-RIO - Block Diagram


CCY-RIO - Assembly Drawing

CCY-RIO - Assembly Drawing

Ordering Information
Alias Ordering No. Short Description
CAJUN CC3-1-CAJUN 3U/4HP CPCI CPU Board, ULV Celeron 400MHz µFCBGA 0.13µ processor, 256MB SDRAM, 256KB cache, 100MHz FSB
CAJUN CC3-2-CAJUN 3U/4HP CPCI CPU Board, ULV Celeron 650MHz µFCBGA 0.13µ processor, 256MB SDRAM, 256KB cache, 100MHz FSB
CAJUN CC3-3-CAJUN 3U/4HP CPCI CPU Board, LV Pentium III 800MHz µFCBGA 0.13µ processor, 256MB SDRAM, 512kB cache, 133MHz FSB
CAJUN CC3-4-CAJUN 3U/4HP CPCI CPU Board, Pentium III 933MHz µFCBGA 0.13µ processor, 256MB SDRAM, 512kB cache, 133MHz FSB
  CC3-8-CAJUN 512MB SDRAM Option
ACID CC6-1-ACID 3U Super-I/O module, local mezzanine expansion board complementing optionally the CC3-CAJUN, front panel 8HP, intended for front panel I/O, mounting on top of the CC3-CAJUN
ACID CC6-3-ACID Similar to the CC6-1-ACID, front panel width 4HP, w/o parallel port, mouse/keyboard combined in one Mini-DIN connector (external splitter cable available as accessory), mounting on the top or to the bottom side of the CC3-CAJUN
ACID CC6-8-HDK Optional hard disk drive, on-board mounting on top of the CC6-1 and CC6-3
RIO CCY-1-RIO Rear I/O transition module for CC3-CAJUN
ADAPT CR9-5-ADAPT Mechanical kit, expands the CC3 front panel to 6U full height
  261.92.009.01 Adapter for front panel RS-232 usage, RJ45 jack to male D-Sub connector 9-pos., customer configurable, suitable e.g. for COM-port emulation
  261.91.009.01 Adapter for front panel RS-232 usage, RJ45 jack to female D-Sub connector 9-pos., customer configurable, suitable e.g. for null-modem emulation
  280.7.400 external keyboard/mouse Y-splitter-cable Mini-DIN male to 2 x Mini-DIN female (required for CC6-3 only)
  908.51.02.01 DVI-D to DVI-D cable assembly, 2m, connects the CC3-CAJUN to DVI monitors (digital way)
  908.57.02.01 DVI-I to HD DSUB15 cable assembly, 2m, connects the CC3-CAJUN to VGA monitors (analog way)
  908.57.12.01 DVI-I to VGA adapter (plug to receptacle), to be plugged onto the CC3-CAJUN DVI output, with HD DSUB15 socket, suitable especially for analog monitors with attached VGA cable
EKF is an ISO-9001 certified company
EKF Elektronik GmbH • Philipp-Reis-Str. 4 • 59065 Hamm • Germany
Phone +49 (0)2381/6890-0 • Fax +49 (0)2381/6890-90 • E-Mail