EKF - Short Profile
EKF - Short Profile


CD2-BEBOP

6U CompactPCI  Pentium® M CPU Board
HTML documents available here
CD2 Description
CD2-BEBOP Product description in English
CD2-BEBOP: Versatile - Low Power - Industrial Grade - High Performance
PDF documents available here
CD2 Product Information
CD2-BEBOP Product information in PDF format - English
CD2 User Guide
PDF Document, CD2-BEBOP User Guide, English
CCA Companion Board PDF Document, CCA-LAMBADA Companion Board, Technical Information, English
CCB Companion Board PDF Document, CCB-BOSSANOVA Companion Board, Technical Information, English
CDY Rear I/O Board
PDF Document, CDY-RIO Technical Information, English
Download area for drivers BIOS Update
Graphics Drivers & Chipset Software
Ethernet Drivers (82541ER)
Ethernet Drivers (82562)
SATA BIOS & Drivers
Audio Drivers
SMB Monitor (EXE)
SMB INI Files for CD2
Subscription of the EKF NewsFlash, an E-Mail Letter with Announcements of Firmware and BIOS Updates
E-Mail on BIOS Update
Subscription of the EKF NewsFlash, an E-Mail Letter with Announcements of Firmware and BIOS Updates, English
E-Mail bei BIOS Update
Abonnement EKF NewsFlash, ein E-Mail Dienst mit Ankündigungen neuer Firmware/BIOS Updates, Deutsch
Download a photo in print quality
Photo Gallery
1 | 2 | 3 | 4 | 5 | 6 | 7
Print Quality, 300dpi 10x15cm .JPG

CD2-BEBOP

6U CompactPCI  Pentium® M CPU
4 x Ethernet up to 1000Mbps - PICMG® 2.16 Dual Link Port



Equipped with the Intel® Pentium® M processor, the CD2-BEBOP is a high performance, low power 6U (double size Eurocard) CompactPCI® CPU board.

The CD2-BEBOP is provided with an embedded graphics controller. The user can choose between a DVI-I receptacle, which allows for attachment of both, advanced (digital) and legacy (analog) flat panel displays and CRT monitors, or the classic VGA D-Sub connector. The Pentium® M (in particular the Low Voltage 1.4GHz chip) reduces the power consumption considerably compared to previous processor generations, thus enabling a reliable passive heatsink solution for thermal discharge.

In addition to several USB2.0 ports, the CD2-BEBOP is equipped with four independent Ethernet controllers for high speed networking up to 1000Mbps. The PICMG® 2.16 Packet Switching Backplane is also supported (Dual Link Port).



For mass storage attachment, the CD2-BEBOP provides both Ultra ATA/100 IDE and RAID capable S-ATA interfaces. In addition, a socket for CompactFlash cards allows utilization of a silicon disk.

The main memory is a SO-DIMM 200 DDR-SDRAM module up to 1GB capacity. A bootable on-board USB2.0 FLASH disk drive up to 2GB is available as an option.

The PMC mezzanine card socket enables on-board expansion of the CD2-BEBOP. Alternatively, an on-board hard disk drive module is optionally available which fits on the PMC slot as well.

In addition to the front panel connectors, the optional CDY-RIO rear I/O transition module offers a variety of on-board and back panel connectors for a versatile usage of the CD2-BEBOP.


CD2-BEBOP - the Versatile Industrial Pentium M CPU Board

CD2-BEBOP with on-Board 2.5-Inch Hard Disk Module

CDY-RIO - Optional Rear I/O Adapter Module Complementing the CD2-BEBOB

CDY-RIO - Optional Rear I/O Adapter Module Complementing the CD2-BEBOB
Feature Summary CD2-BEBOP
Form Factor Double size CompactPCI style Eurocard (160x233mm2), front panel width 4HP (20.3mm)
Processor Designed for Intel® Pentium® M Micro FC-BGA 479 processors (0.13µ Banias, 0.09µ Dothan), maximum junction temperature 100°C
  • 600MHz ULV Celeron® M, 512KB L2 cache, 7W
  • 1.4GHz LV Pentium® M (Dothan733), 2MB L2 cache, 10W
  • 1.8GHz Pentium® M (Dothan745), 2MB L2 cache, 21W
  • 2.0GHz Pentium® M (Dothan755), 2MB L2 cache, 21W
Chipset Intel® i855 chipset consisting of:
  • 82855GME Graphics/Memory Controller Hub (GMCH) - Montara
  • 82801D I/O Controller Hub (ICH4)
  • 2 x Firmware Hub (FWH) 82802 compatible
Memory 200-pin SO-DIMM socket (notebook style module), PC2100/2700 DDR266/333-SDRAM, 1GB maximum
Video Analog monitor and digital flat-panel display support by DVI-I connector (front panel), up to 2048x1536 pixel 16M colours @75Hz refresh rate (analog), up to 1600 x 1200 pixel 16M colours @60Hz (digital), incorporates PanelLink Digital technology (Silicon Image). Front panel option: D-Sub (female HD15) VGA connector available, replaces DVI-I connector
USB All ports over-current protected, data transfer rate of up to 480Mbps, conforming to USB2.0
  • USB port 1-2: Type A connector (front panel)
  • USB port 3: Expansion interface option (CCA-LAMBADA mezzanine companion board)
  • USB port 4-5: J4/P4 Rear I/O option (CDY-RIO rear I/O transition module)
  • USB port 6: dedicated to the optional on-board USB Flash drive
Ethernet
  • 3 x 10/100/1000Mbps Gigabit Ethernet controllers (82541)
  • Jumbo Frame support up to 16KB
  • 1 x 10/100Mbps Fast Ethernet Controller (82562)
  • 1 x Gigabit and Fast Ethernet accessible via RJ45 jacks from the front panel
  • 2 x Gigabit Ethernet as rear I/O according to PICMG® 2.16 across J3 (alternatively accessible via RJ45 jacks from the CDY-RIO back panel)
IDE/ATA (Parallel)
  • Ultra ATA/100 connector (Secondary IDE), handover to CCA-LAMBADA mezzanine expansion board with CCA on-board hard disk drive or external device
  • CompactFlash socket (mezzanine module) for CFA ATA cards (Secondary IDE)
  • J4/P4 Rear I/O option: Primary IDE accessible from CDY-RIO rear I/O transition module
  • CD2 on-Board hard disk drive module option (Primary IDE)
Serial ATA On-board dual Serial ATA controller, ports available across J5/P5 on CDY-RIO rear I/O module (alternatively accessible via Serial ATA connectors on board), RAID and non-RAID drivers available
FLASH Drive Optional on-board USB2.0 FLASH drive controller and 2 pcs. NAND FLASH up to 8Gbit each (total memory capacity up to 2GByte), can be configured as bootable disk, data transfer rates up to 18MB/s for read, 13MB/s for write (dual channel mode)
Mezzanine Facility Optional usage of either
  • 1 Slot for a PMC module, I/O from the front panel and across J5
  • On-board 2.5-inch hard disk module (Primary IDE)
Expansion Interface
  • On-board LPC/USB/AC97 Super-I/O, USB and audio expansion interface connector
  • Suitable CCA-LAMBADA 3U mezzanine companion board available
Rear I/O
  • 2 x Gigabit Ethernet (J3)
  • 2 x Serial ATA (J3)
  • Primary IDE (J4)
  • 2 x USB (J4)
  • LPT, COM, GPIO (J4)
  • PMC mezzanine rear I/O (J5)
  • Suitable rear I/O transition module CDY-RIO available
CompactPCI  Bus 32-bit PCI bridge chip PLX PCI 6150 (HB4), 133MBps CPCI master, transparent mode (CPCI system slot operation). When using the CD2-BEBOP on a peripheral slot the PCI bridge must be removed (special board versions available on request)
Hot Swap Function Board hot insertion/extraction without adversely effecting a running system, 'Basic Hot Swap' implementation according to CompactPCI Hot Swap Specification PICMG® 2.1. In order to use the CD2-BEBOP as a peripheral slot board, the local PCI bridge must be removed (stand-alone operation or PICMG 2.16 communications path required instead of PCI bus data exchange), special board versions are available on request
PICMG® 2.16 Dual Link Port Node, complies with the PICMG® 2.16 CompactPCI® Packet Switching Backplane Specification
BIOS Phoenix BIOS
Typical Power Consumption
  • +5V +0.25V/-0.15V tbd A max.
  • +3.3V +0.17V/-0.1V tbd A max.
Thermal Conditions
Environmental Conditions
  • Operating temperature: 0°C ... +70°C (CPU dependent)
  • Storage temperature: -40°C ... +85°C, max. gradient 5°C/min
  • Humidity 5% ... 95% RH non condensing
  • Altitude -300m ... +3000m
  • Shock 15g 0.33ms, 6g 6ms
  • Vibration 1g 5-2000Hz
EC Regulations EN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1)
Typical Performance Rating

(PCMark2002 under Windows XP with 512MB PC2700 DDR)

Board Processor CPU/MEM Score
CD2-1X-BEBOP 1.4GHz LV Pentium® M (Dothan 738) 4745/8489
CD2-2X-BEBOP 1.8GHz Pentium® M (Dothan 745) 6100/10441
CD2-3X-BEBOP 2.0GHz Pentium® M (Dothan 755) 6773/11398
MTBF tbd h
subject to change
CD2-BEBOP - PMC Carrier Board

CD2-BEBOP as PMC Carrier Board (with DE2-TIGER SATA RAID Controller)
CD2-BEBOP - Block Diagram Sheet 1

CD2-BEBOP - Block Diagram Sheet 1
CD2-BEBOP - Block Diagram Sheet 2

CD2-BEBOP - Block Diagram Sheet 2
CD2-BEBOP - Connector Orientation

CD2-BEBOP - Connector Orientation
CD2-BEBOP with CF Module and DB1-FALCON USB2.0 PMC Module

CD2-BEBOP with CF Module and DB1-FALCON USB2.0 PMC Module
CD2-BEBOP with 1.8-Inch Hard Disk Module

CD2-BEBOP with 1.8-Inch Hard Disk Module
Ordering Information
Alias Ordering No. Short Description
BEBOP CD2-1A-BEBOP 6U, LV Pentium M 1.4GHz 738, 512MB DDR SDRAM, 6 x USB, 4 x Ethernet (3 x GB), PICMG 2.16 Dual Link, IDE, SATA, CompactFlash ATA slot, 1 x PMC mezzanine, DVI-I video, rear I/O, on-board USB Flash drive
BEBOP CD2-2A-BEBOP similar to CD2-1A-BEBOP, 1.8GHz Pentium® M 745
BEBOP CD2-3A-BEBOP similar to CD2-1A-BEBOP, 2.0GHz Pentium® M 755
BEBOP CD2-XH-BEBOP Hard disk drive module option (replaces PMC slot), X=1/2/3
  CD2-Z-BEBOP 1GB memory option
RIO CDY-1-RIO
6U, 4HP J4/J5 rear I/O transition module
RIO CDY-2-RIO
6U, 8HP J4/J5 rear I/O transition module with rear I/O 2.5" hard disk module
LAMBADA CCA-1-LAMBADA 3U mezzanine module, local expansion board complementing the CD2-BEBOP, front panel width 4HP, optional AC'97 codec
FALCON DB1-1-FALCON
PMC module, USB2.0 controller
TIGER DE2-2-TIGER
PMC module, SATA controller + 1.8-inch hard disk drive
  280.7.400 External PS/2 keyboard/mouse Y-splitter-cable mini-DIN male to 2 x mini-DIN female
  908.51.02.01 DVI-D to DVI-D cable assembly, 2m, connects the CD2-BEBOP to DVI monitors (digital way)
  908.57.02.01 DVI-I to HD DSUB15 cable assembly, 2m, connects the CD2-BEBOP to VGA monitors (analog way)
  908.57.12.01 DVI-I to VGA adapter (plug to receptacle), to be plugged onto the CD2-BEBOP DVI output, with HD DSUB15 socket, suitable especially for analog monitors with attached VGA cable

CD2-BEBOP with CDY-RIO

CD2-BEBOP with CDY-RIO
EKF is an ISO-9001 certified company
EKF Elektronik GmbH • Philipp-Reis-Str. 4 • 59065 Hamm • Germany
Phone +49 (0)2381/6890-0 • Fax +49 (0)2381/6890-90 • E-Mail