CompactPCI * Adapter
CA2-1-FUNK	3U, adapter PCI-to-CPCI (carrier/bridge), 1 PCI slot suitable for PCI Card 57.00mm x 160.00mm, front panel width 8HP
CA2-3-FUNK	3U, adapter PCI-to-CPCI (carrier/bridge), 3 PCI slots suitable for PCI Short Cards, front panel width 28HP (completely covering the PCI Cards)
CA2-4-FUNK	6U, adapter PCI-to-CPCI (carrier/bridge), 1 PCI slot suitable for PCI Card 57.00mm x 160.00mm, front panel width 8HP
CompactPCI * CPU 6U Gen Purpose
CD3-3-JIVE	6U, LV Pentium M 1.4GHz (Dothan 738), 1GB DDR2, 3 x GB-Ethernet, PICMG 2.16 Dual Link, 8 x USB, 4 x SATA, CompactFlash ATA slot, 1 x PMC mezzanine, dual screen video, rear I/O
CD3-6-JIVE	Similar to CD3-3-JIVE but 2.0GHz Pentium M 760 (533MHz FSB)
CompactPCI * CPU 6U Rear I/O
CDT-1-RIO	6U/4HP Rear I/O transition module (J3/J4/J5) for CD3-JIVE
CompactPCI * CPU Dual Core
CCG-1RD-RUMBA	3U/4HP, Core(TM) 2 Duo U7500 1.06GHz FSB 533MHz 2MB L2, dual socket with 2GB DDR2 SO-DIMM (up to 4GB), DVI-I, dual GB-ETH, 7 x USB, 1 x PATA, 3 x SATA-2, 4 x PCIe, CF card slot, suitable for rear I/O across J2
CCG-4RD-RUMBA	Similar to CCG-1RD-RUMBA, but Core(TM) 2 Duo L7500 1.6GHz CPU, FSB 800MHz, 4MB L2
CCG-8RD-RUMBA	Similar to CCG-1RD-RUMBA, but Core(TM) 2 Duo T7500 2.2GHz CPU, FSB 800MHz, 4MB L2
CCG-8RV-RUMBA	Similar to CCG-8RD-RUMBA, but VGA-Connector,
CompactPCI * CPU Dual Core Hi Per
CCM-21RD-BOOGIE	3U/4HP, Core(TM) 2 Duo ULV 1.2GHz, FSB 800MHz, 3MB L2, TDP 10W, GS45 graphics, 1GB onboard DDR3 memory, DVI-I dual screen, dual GB-ETH, 3 x SATA-2, PCIe x 4, suitable for rear I/O across J2
CCM-41RD-BOOGIE	Similar to CCM-21RD-BOOGIE, Core(TM) 2 Duo LV 1.86GHz CPU, FSB 1066MHz, 6MB L2
CCM-61RD-BOOGIE	Similar to CCM-21RD-BOOGIE, Core(TM) 2 Duo SV 2.26GHz CPU, FSB 1066MHz, 6MB L2
CompactPCI * CPU General Purpose
CCD-2R-CALYPSO	3U/4HP ULV Celeron M 373 1.0GHz CPU, FSB 400MHz, DVI-I video, 2 x GB Ethernet, 7 x USB2.0, 3 x SATA, PATA, CompactFlash slot, 2 x 512MB DDR2 (533), suitable for rear I/O across J2
CCD-3R-CALYPSO	Similar to CCD-2R-CALYPSO, but LV Pentium M 738 1.4GHz CPU
CCD-6R-CALYPSO	Similar to CCD-2R-CALYPSO, but SV Pentium M 760 2.0GHz CPU FSB 533MHz
CompactPCI * CPU Mezzanine
C23-1-SATA	3U/4HP Mezzanine expansion side board for CCD-CALYPSO - CCG-RUMBA - CCM-BOOGIE, 3 x COM, PCIe to 2 x SATA / 1 x PATA controller, SIO, FWH, USB, option AC'97 Codec (CCD only), option TPM
C32-1-FIO	Add-on mezzanine module with mixed front panel I/O, 2 x COM RS-232, 2 x USB, PS/2 keyboard/mouse, suitable for CCO-CONCERT (12HP assembly stack)
C40-1-SCFA	Add-on module, SATA to CompactFlash adapter, for CCM-BOOGIE or similar, stack height 9mm
C41-1-CFAST	Add-on mezzanine module, CFast SSD card adapter, stack height 9mm for CCM-BOOGIE, PC1-GROOVE or similar
C42-1-SATA	Add-on module, 1.8-inch Micro SATA solid state drive, for CCM-BOOGIE or similar, stack height 9mm
C43-1-SATA	Add-on module, internal SATA & USB connectors, for CCM-BOOGIE or similar, stack height 9mm
C43-2-SATA	Add-on module, 3 internal SATA connectors, for CCM-BOOGIE or similar, stack height 9mm
C44-1-SATA	3U/4HP Mezzanine expansion board for CCM-BOOGIE and successor CPU cards, side board with 2.5-inch SATA SSD or HDD option, front panel I/O 2 x eSATA (RAID) and 3 x USB
C45-1-SATA	3U/4HP Mezzanine expansion board for CCM-BOOGIE and successor CPU cards, side board with 1.8-inch SATA SSD, front panel I/O 2 x eSATA (RAID) and 3 x USB
C45-2-SATA	3U/4HP Mezzanine expansion board for CCM-BOOGIE and successor CPU cards, side board with removable 1.8-inch SATA SSD, front panel I/O 2x USB
CCE-1-PUNK	3U/4HP Mezzanine expansion board for CCD-CALYPSO, 2 x 1394a FireWire, 2 x USB2.0, 2 x RS-232, option on-board hard disk
CCE-2-PUNK	Similar to CCE-1-PUNK, w/o IEEE 1394
CCI-1-RAP	3U/4HP Mezzanine sideboard for CCG-RUMBA/CCM-BOOGIE with PCI Express Mini Card socket, DVI-D digital video, 2 x FireWire (IEEE1394a), 1x RS232 COM Port, option on-board SATA drive with C20
CCI-2-RAP	Similar to CCI-1-RAP 2 x RS-232 (COM), w/o DVI video
CCI-3-RAP	3U/4HP Mezzanine sideboard for CCG-RUMBA/CCM-BOOGIE with 2x PCI Express Mini Card socket, DVI-D digital video, 1x RS232 COM Port, option on-board SATA drive
CCI-4-RAP	Similar to CCI-3-RAP 2 x RS-232 (COM), w/o DVI video
CCJ-1-RHYTHM	3U/4HP Mezzanine expansion board for CCG-RUMBA, System Slot sideboard for CompactPCI Express, DVI-D, 1 x USB, 2 x FireWire, 1 x RS-232 (COM), on-board drive option, option TPM 1.2
CCJ-2-RHYTHM	Similar to CCJ-1-RHYTHM, 2 x RS-232 (COM), w/o DVI video
CCK-1-MARIMBA	3U/4HP Mezzanine expansion board for CCG-RUMBA and CCM-BOOGIE, side board with PMC/XMC module socket CompactFlash socket, opt. C20-4-SATA
CCL-1-CAPELLA	3U/4HP Mezzanine expansion board for CCG-RUMBA and CCM-BOOGIE, side board with 4 x GB-Ethernet option onboard SATA drive with C20
CCL-2-CAPELLA	3U/4HP Mezzanine expansion board for CCG-RUMBA and CCM-BOOGIE, side board with 4 x GB-Ethernet IEEE 1394, option onboard SATA drive with C20, CompactFlash with C10, 2 external SATA interface.
CCL-97-CAPELLA	3U/4HP Mezzanine expansion board for CCG-RUMBA and CCM-BOOGIE, side board with 4 x GB-Ethernet option onboard SATA drive with C20
CCO-1-CONCERT	3U/4HP Mezzanine expansion board for CCG-RUMBA and and CCM-BOOGIE, front panel I/O includes audio (line-In -Line Out), DVI-D, on-board 2.5-inch SATA COM Port
CCO-2-CONCERT	3U/4HP Mezzanine expansion board for CCD, CCG-RUMBA and CCM-BOOGIE, front panel I/O includes USB, audio (line-In -Line Out), 2x COM Port, on-board SATA port for 2.5" device
CCO-4-CONCERT	3U/4HP Mezzanine expansion board for CCM-BOOGIE, front panel I/O includes USB, audio (line-In -Line Out), 2x COM Port, on-board SATA port for 2.5" device
CCO-5-CONCERT	3U/4HP Mezzanine expansion board for CCM-BOOGIE, front panel I/O includes USB, audio (line-In -Line Out), 2x COM Port, up to 2x SATA drive 2.5" via C20 carrier
CCO-6-CONCERT	3U/4HP Mezzanine expansion board for CCM-BOOGIE front panel I/O includes audio (line-In -Line Out) DVI-D, on-board 2.5-inch SATA connector, 1* COM Port
CompactPCI * CPU Rear I/O
CCT-1-RIO	3U/4HP Rear I/O transition module for CCD-CALYPSO - CCG-RUMBA - CCM-BOOGIE, 2 x SATA, 1 x ESATA, 2 x USB, GB-Ethernet, VGA video, RS-232
CompactPCI * ExpressCard
CP5-01-GLAM	3U, new technologies carrier board: one ExpressCard slot 34/54mm, two PCI Express MiniCard sockets incl. SIM/UIM card holders, 2 x SMA antenna connectors for WiFi/GSM/WiMax
CP5-02-GLAM	3U, new technologies carrier board: Single ExpressCard slot 34/54mm, full support for PCI Express & USB type ExpressCards
CP5-11-GLAM	3U, new technologies carrier board: two PCI Express MiniCard sockets incl. SIM/UIM card holders, 6 x SMA antenna connectors for MIMO WiFi/GSM/WiMax
CompactPCI * GPS Receiver
CG2-1-SHANTY	3U, GPS 12-channel receiver (position, clock), NMEA-0183 & SiRF binary protocol, DGPS input RTCM SC-104 protocol
CompactPCI * GSM-RAILWAY
CP4-1-SCAT	Carrier card for GSM-R radio module & PE Mini Card, front panel with 4 x SMA antenna connectors, 3 x USB
CP4-9-SCAT	DC/DC regulator, delivers +3.3V/10A to the backplane, for systems with a single rail +5V power supply
CompactPCI * IEEE 1394 FireWire
CF2-2-CYMBAL	3U, 3-Port 400Mbps IEEE 1394 FireWire OHCI hostadapter, High Performance Serial Bus, TI OHCI-Lynx LLC, TI triple cable PHY 400Mbps
CompactPCI * Network Switching
CL1-05-COMBO	Gigabit Ethernet switch, 5 x RJ45 front panel jacks, 802.1 Audio Video Bridging (AVB), QoS support, P2: +5V 5 1/4 inch Hard Disk style connector for power supply.
CL1-06-COMBO	Gigabit Ethernet switch, 5 x RJ45 front panel jacks, 802.1 Audio Video Bridging (AVB), QoS support, CPCI J1 Connector for +5V power supply only.
CL1-15-COMBO	Gigabit Ethernet switch, 5 x RJ45 front panel jacks, auxiliary port internally connected to on-board GE NIC, 802.1 Audio Video Bridging (AVB), QoS support
CL2-05-BRASS	Gigabit Ethernet switch, 5 x M12 F/P receptacles, 802.1 Audio Video Bridging (AVB), QoS support, additional +5V power connector for alternate supply
CL2-15-BRASS	Gigabit Ethernet switch, 5 x M12 F/P receptacles, auxiliary port internally connected to on-board GE NIC, 802.1 Audio Video Bridging (AVB), QoS support
CompactPCI * Networking
CN4-1-BELL	3U, quad 10BASE-T/100BASE-TX Fast Ethernet NIC, auto-negotiation, full-duplex, 4 x RJ45
CN6-1-ECHO	3U, Dual 1000BASE-T Gigabit Ethernet NIC, 2 x RJ45 10/100/1000Mbps, 32/64-bit J1/J2 CPCI 33/66MHz
CN7-05-REVERB	5-Port Gigabit Ethernet controller, 5 x RJ45 front panel connectors
CompactPCI * PC Card / CardBus
CP3-1-HOUSE	3U, Dual socket PC Card hostadapter, 2 type I-II cards or 1 type III PC Card, compliance (mix and match) with 16-bit PCMCIA and 32-bit CardBus cards
CompactPCI * SATA/PATA
CE4-3-PIANO	3U, Serial ATA controller with option for 2.5-inch on-board SATA hard disk drive
CE5-1-CADENZA	3U, Quad Serial ATA controller (SATA RAID option), 4 front panel SATA connectors
CE5-1X-CADENZA	3U, Quad Serial ATA controller (SATA RAID option), 3 front panel SATA connectors, 1 SATA/IDE-Bridge with connector for internal usage, prepared for 2.5-inch on-board IDE drive, contact EKF for a drive suggestion!
CE5-2-CADENZA	3U, Quad Serial ATA controller (SATA RAID option), 4 on-board SATA connectors for internal usage
CE5-2X-CADENZA	3U, Quad Serial ATA controller (SATA RAID option), 3 on-board SATA connectors, 1 SATA/IDE-Bridge with connector for internal usage, prepared for 2.5-inch on-board IDE drive, contact EKF for a drive suggestion!
CompactPCI * Serial Interface
CU4-1-SOPRANO	3U, 4-port asynchronous serial interface, RS-232/RS-485 individually selectable, front panel I/O, w/o J2 connector, suitable for 32/64-bit CPCI backplane
CU7-2-RS485	RS-485/RS-422 Rear I/O PHY interface module, 1 port, 2.5Mbps 4-wire transmission line (point-to-point), electrically isolated, including cabling assembly
CU8-1-RS232	RS-232E/V.28 Rear I/O PHY interface module, 1 port, full modem support, ESD protection, max. 230 kbps, includes 30cm metric flat ribbon cable assembly, not included: rear mounting panel
CU9-4-BASE	3U Transition adapter board, bridge between CU4-SOPRANO rear I/O (backplane J2) and CU7/CU8 PHY interface modules, 4 ports (2mm connectors), 3U back panel 8HP
CompactPCI * System Rack
CR1-1-RACK	19-" system rack 1U, 2 slot CompactPCI backplane 6U, P1-P5 (P3-P5 rear I/O), power supply 100-240VAC 200W
CR4-2-RACK	19" System rack 4U, 8-slot CompactPCI backplane 3U P1-P2, industrial ATX power supply, 1U fan unit, depth 280mm, suitable for 3U CompactPCI boards
CR4-4-RACK	Similar to CR4-2-RACK, but Rear I/O backplane
CR4-46-RACK
CR9-5-ADAPT	front panel expansion adapter for 3U board mounting in 6U racks, suitable for all EKF 3U (4HP) boards,
CR9-6-ADAPT	same as CR9-5, but double width (8HP)
CRB-1-BLUELINE	'Blue Line' 3U/30HP small system rack, w h d ~ 172mm x 132mm x 208mm, incl. tip up feets CPCI PSU 70W 115/230VAC, CPCI backplane 4 x P1, suitable for 3U CompactPCI boards
CRB-2-BLUELINE	Similar to CRB-1-BLUELINE, 24VDC power line input
CRB-4-BLUELINE	'Blue Line' 3U/30HP small system rack incl. fan unit, w h d ~ 172mm x 166mm x 208mm, incl. tip up feets, CPCI PSU 70W 115/230VAC, CPCI backplane 4 x P1, suitable for 3U CompactPCI boards
CRB-5-BLUELINE	Similar to CRB-4-BLUELINE, 24VDC power line input
CompactPCI * USB
CB2-1-PIPE	3U, 5-port USB2.0 480Mbps host adapter EHCI/OHCI
CompactPCI * Ultra160 SCSI
CS5-1-HORN	3U, dual SCSI HA, 2x160MB/s Ultra160 LVD/SE, dual external VHDCI receptacles, single internal HDSUB connector, auto termination, 53C1010-33 controller, Flash BIOS, bootable, 33MHz 32-bit CPCI I/F J1
CS5-2-HORN	Similar to CS5-1-HORN, 53C1010-66 controller, 66MHz 32/64-bit CPCI I/F J1/J2