PC5-LARGO

CompactPCI® PlusIO CPU Card • 5th Generation Intel® Core™ Mobile Processor (Broadwell) Quad-Core • Up to 24GB DDR3L ECC Memory

The PC5-LARGO is a rich featured high performance 4HP/3U CompactPCI® PlusIO CPU board, equipped with a 5th Generation Intel® Core™ mobile processor (Broadwell quad-core). The PC5-LARGO front panel is provided with two Gigabit Ethernet jacks, two USB 3.0 receptacles, and two Mini DisplayPort connectors (DisplayPort 1.2 MST, 4k UHD).
Local expansion mezzanine boards (side cards) are available for additional front panel and/or rear I/O, resulting in an 8HP front panel width assembly unit.
The PC5-LARGO is equipped with up to 24GB DDR3L ECC RAM. 8GB memory-down are provided for rugged applications, and another 16GB are available via the SO-DIMM socket. Low profile SSD mezzanine modules are available as on-board mass storage solution. The PC5-LARGO backplane connectors comply with the PICMG® CompactPCI® PlusIO system slot specification, suitable for a rear I/O module or hybrid CompactPCI® Serial system via J2. Across J1, the PC5-LARGO is backwards compatible to classic CompactPCI® systems. The PC5-LARGO is equipped with a set of local expansion interface connectors, which can be optionally used to attach a mezzanine side board. A variety of expansion cards is available, e.g. providing legacy I/O and additional PCI Express® based I/O controllers such as SATA, USB 3.0 and Gigabit Ethernet, or a third video output. Most mezzanine side cards can accommodate in addition a 2.5-inch drive.
Typically, the PC5-LARGO and the related side card would come as a readily assembled 8HP unit. As an alternate, low profile Flash based mezzanine storage modules are available that fit on the PC5-LARGO while maintaining the 4HP profile. The C48-M2 module e.g. is equipped with two M.2 (up to 2280 size) SATA Solid State Drives (SSD), suitable for installation of any popular operating system.

Downloads & Ressources

General Information

Firmware

Firmware Update

Monitoring

SpeedFan
Cfg. Data

Board Support Packages

QNX
VxWorks

Expansion Modules

Low Profile Mezzanine Modules
Side Boards +4Hp +8HP
Side Boards +4Hp +8HP

Specifications

  • CompactPCI® PlusIO (PICMG® CPCI 2.30) System Slot Controller
  • Form factor single size Eurocard (board dimensions 100x160mm2)
  • Mounting height 3U
  • Front panel width 4HP (8HP/12HP assembly with optional mezzanine side card)
  • Front panel I/O connectors for typical system configuration (2 x USB3, 2 x DisplayPort, 2 x GbE)
  • Backplane communication via CompactPCI® J1 and J2 hard metric connectors
  • J1 Connector for Full CompactPCI® Classic 32-Bit Support
  • J2 Connector (UHM high speed) for CompactPCI® PlusIO support (4 x PCIe Gen2, 4 x SATA 3G/6G*, 4 x USB, 2 x GbE)
  • J2 PlusIO configuration allows for either CompactPCI® Serial backplane usage or rear I/O module attachment
  • On-board PCIe x 4 Gen2 mezzanine expansion option (side card)
  • On-board SATA x 4 6G mezzanine expansion option for mass storage modules or side cards
  • On-board DisplayPort (3rd video output) mezzanine expansion option for side cards
  • Side cards and low profile mass storage modules available as COTS and also as custom specific

Simplified Block Diagram

pc5 blk
Contact Us