EKF - Short Profile
EKF - Short Profile
PC7-FESTIVAL

CompactPCI® PlusIO CPU Card

Intel® XEON® E3 v6 Family Processor
PC7-FESTIVAL

Description

Ordering Information

Product Information

Block Diagram

Application Notes
Power Event (Power Down)

General Information
PlusIO

Low Profile Mezzanine Modules
C48 | S20 | S40
Mezzanine Side Cards
PCU | SCL | SCZ


PC7-FESTIVAL

Firmware

Update

Drivers

Graphics | Ethernet | SATA

Photo Gallery

1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12

Low Profile Mezzanine Modules

1 | 2 | 3


© EKF • Images show up in a secondary browser tab or window


PC7-FESTIVAL

CompactPCI® PlusIO CPU Card

Intel® XEON® E3 v6 Processor


The PC7-FESTIVAL is a rich featured high performance 4HP/3U CompactPCI® PlusIO CPU board, equipped with an Intel® Xeon® E3 familiy mobile workstation processor for demanding applications. For scalability, the PC7-FESTIVAL is also available with a 7th Generation Intel® CoreT processor.

The PC7-FESTIVAL front panel is provided with two RJ45 Gigabit Ethernet jacks, two USB 3.0 Type-A receptacles, and two DisplayPort™ connectors. In addition, up to two USB Type-C front panel receptacles are available as an option, one of them usable alternatively as (third) DisplayPort.

The powerful Xeon® E3-1500 v6 series processor is accompanied by the CM238 mobile PCH, for a maximum of high speed I/O resources (e.g. PCI Express®, SATA, USB).


On-board mass-storage solutions are based on low profile mezzanine expansion cards, which can accommodate up to two M.2 style SSD modules (PCIe® Gen3 x4 and/or SATA). Side cards for an 8HP assembly are also available, providing front I/O and M.2 SSDs.

The PC7-FESTIVAL is equipped with up to 32GB DDR4 RAM with ECC support. Up to 16GB memory-down are provided for rugged applications, and another 16GB are available via the DDR4 ECC SO-DIMM socket.

The backplane connector J1 allows for up to seven CompactPCI® Classic peripheral cards in a system. The J2 connector complies with the CompactPCI® PlusIO standard for high speed rear I/O (fourfold PCIe®, SATA and USB2), or usage of a hybrid CompactPCI® Serial backplane.


PC7-FESTIVAL

PC7-FESTIVAL • Low Power CPU Board

Feature Summary

General
  • CompactPCI® PlusIO (PICMG® CPCI 2.30) System Slot Controller
  • Form factor single size Eurocard (board dimensions 100x160mm2)
  • Mounting height 3U
  • Front panel width 4HP (8HP/12HP assembly with optional mezzanine side card)
  • Front panel I/O connectors for typical system configuration (2 x USB3, 2 x DisplayPort, 2 x GbE)
  • Backplane communication via CompactPCI® J1 and J2 hard metric connectors
  • J1 Connector for PICMG® CompactPCI® 32-Bit Support
  • J2 Connector (UHM high speed) for CompactPCI® PlusIO support (PCIe, SATA, USB, GbE)
  • J2 PlusIO configuration allows for either CompactPCI® Serial backplane usage or rear I/O module attachment
  • J2 Connector option available for 64-bit system slot (legacy CompactPCI® 2.0 Classic)
  • Side cards and low profile mass storage modules available as COTS and also as custom specific

Power Supply
  • +5V, +3.3V according to CompactPCI® 2.0 via J1 backplane connector
  • Total power consumption depends on processor type and mezzanine assembly
  • Option +5V only board design for low cost system power supply with 25W processors
  • SAC (Stand-Alone Computer) option w. two-pos. 5V/10A terminal block (J1/J2 removed)
  • +12V is required additionally for PC7-FESTIVAL mezzanine assemblies with S20, S40, SCL, SCZ

Processor
  • Intel® Kaby Lake-H mobile platform with ECC (CM238 mobile workstation PCH)
  • Intel® Xeon® processor E3 v6 family (mobile workstation)
  • Xeon E3 1505M v6 • 3/4GHz • 8M • 4C/8T • DDR4 2400 ECC • 45/35W • GT2 - P630 • vPRO™/AMT
  • Xeon E3 1505L v6 • 2.2/3GHz • 8M • 4C/8T • DDR4 2400 ECC • 25W • GT2 - P630 • vPRO™/AMT
  • 7th Generation Intel® Core™ mobile processor
  • i3 7100E • 2.9GHz • 3M • 2C/4T • DDR4 2400 ECC • 35W • GT2 - 630
  • i3 7102E • 2.1GHz • 3M • 2C/4T • DDR4 2400 ECC • 25W • GT2 -630

Firmware
  • Phoenix® UEFI (Unified Extensible Firmware Interface) with CSM*
  • Fully customizable by EKF
  • Secure Boot and Measured Boot supported - meeting all demands as specified by Microsoft®
  • Windows®, Linux and other (RT)OS' supported
  • Intel® AMT supported for Intel® Xeon® E3 v6 (disabled by default, must be enabled via BIOS setup)
* CSM (Compatibility Support Module) emulates a legacy BIOS environment, which allows to boot a legacy operating system such as DOS, 32-bit Windows and some RTOS'

Main Memory
  • Integrated memory controller up to up to 32GB DDR4 2400 +ECC
  • DDR4 +ECC soldered memory up to 16GB
  • DDR4 +ECC SO-DIMM memory module socket up to 16GB

Mezzanine Mass Storage
  • Mezzanine side card connectors for local expansion e.g. SSD mass storage
  • Low profile mezzanine modules available (4HP common front panel)
  • Side cards available (8HP common F/P assembly)
  • P-HSE1 - configurable as 4 x SATA 6G or 4 x PCIe® Gen3 (from CM238 PCH), 1 x USB3
  • P-HSE2 - 4 x PCIe® Gen3 (from CM238 PCH) & 3rd DisplayPort™ (from CPU)
  • P-EXP - Legacy interface (from PCH)
  • 4HP Low profile mezzanine module preferred options:
  • C48-M2 Mezzanine module - 2 x M.2 2280 SATA SSD sockets
  • S20-NVME Mezzanine module - 1 x M.2 2280 NVME SSD socket, 1 x Type-C USB F/P connector
  • S40-NVME Mezzanine module - 1 x M.2 2280 NVME SSD socket, 1 x M.2 2280 SATA SSD socket, 2 x Type-C USB F/P Connector (1 connector enabled for DisplayPort™ alternate mode)
  • 8HP/12HP Mezzanine side card options:
  • SCL-RHYTHM Dual M.2 (NVMe/SATA) SSD, quad port front panel M12-X GbE
  • SCZ-NVM Dual M.2 NVMe SSD, quad UART
  • P01-M12 Replacement for RJ45 GbE jacks by M12-X receptacles
  • PCU-UPTEMPO Side board w. 2 x M.2 SATA SSD sockets & front I/O
  • Custom specific side card design - I/O and storage

Graphics
  • Integrated graphics engine, 3 symmetric independent displays
  • 3D HW acceleration DirectX12, OpenCL 2.x, OpenGL 4.3/4.4, ES 2.0
  • HW video decode/encode HEVC10b 10-bit, VP9 10-bit, JPEG
  • HDR (High Dynamic Range) Rec. 2020 Wide Color Gamut
  • Content protection
  • UHD premium content playback
  • Front panel options: Dual DisplayPort™ (DP) connectors
  • 3rd DisplayPort™ optional via Type-C connector on low profile mezzanine card
  • Max resolution 4096 x 2304 @60Hz (any DisplayPort, concurrent operation)
  • DisplayPort™ 1.2 Multi-Stream Transport (MST) - display daisy chaining
  • MST max resolution via single DP connector 2880x1800@60Hz (2 displays), 2304x1440@60Hz (3 displays)
  • Integrated audio (3 independent audio streams)

Networking
  • Up to four networking interface controllers (NIC), 1000BASE-T, 100BASE-TX, 10BASE-T connections
  • Port 1 equipped w. I219LM PHY (suitable for Intel® AMT)
  • Port 2 equipped w. Intel® I210-IT -40°C to +85°C operating temperature GbE controller w. integrated PHY
  • IPv4/IPv6 checksum offload, 9.5KB Jumbo Frame support, EEE Energy Efficient Ethernet
  • IEEE 802.1Qav Audio-Video-Bridging (AVB) enhancements for time-sensivitive streams
  • IEEE 1588 and 802.1AS packets hardware-based time stamping for high-precision time synchronization
  • RJ45 front panel jacks (option 2 x M12-X with mezzanine module P01)
  • Option front panel M12 X-coded GbE ports with SCL-RHYTHM side card (8HP front panel width)

Chipset
  • Intel® CM238 Mobile Workstation Platform Controller Hub (PCH)
  • PCIe® Gen3 8GT/s
  • SATA 6G
  • USB3
  • GbE
  • SPI, LPC, Audio, Legacy

On-Board Building Blocks
  • Additional on-board controllers, PCIe® based
  • PCIe® to PCI® Bridge 32bit 33/66MHz for 7 CompactPCI®Classic peripheral card backplane slots
  • 1 x Gigabit Ethernet controllers Intel® I210IT (front panel)
  • 1 x Gigabit Ethernet PHY Intel® I219LM (front I/O)
  • IEEE 1588-2008 Precision Time Protocol including PPS and PPM signals supported

Security
  • Trusted Platform Module (option)
  • Discrete TPM 2.0 for highest level of certified platform protection
  • Infineon Optiga™ SLM 9670 cryptographic processor
  • Conforming to TCG 2.0 specification
  • Option fTPM (firmware-based TPM 2.0) or dTPM (discrete TPM) selectable from UEFI (BIOS) setup
  • AES hardware acceleration support (Intel® AES-NI)

Front Panel I/O (4HP)
  • 2 x Gigabit Ethernet RJ45 (1 = PCH & I219LM - Intel® AMT support, 2 = I210IT)
  • 2 x DisplayPort™ (from processor integrated HD graphics engine, standard DP latching receptacles)
  • 2 x USB 3.0 Type-A
  • Option 2 x Type-C USB 3.1 Gen1 w. S40-NVME low profile mezzanine module
  • Support for Type-C locking plugs (dual screw) according to the 'Locking Connector Spec. Rev. 1.0'
  • DisplayPort™ Alt Mode on lower Type-C connector (3rd video monitor output)

Additional Front I/O (8HP)
  • Option RS-232, USB3, DisplayPort™ w. SCZ-NVM side card
  • Option quad port GbE M12-X receptacles w. SCL-RHYTHM side card
  • Option 2 x M12 X-coded receptacles for Gigabit Ethernet (P01, as replacement for RJ45)
  • Option RS-232, HD-Audio, USB w. PCU-UPTEMPO side card
  • Custom specific front panel and side card design

CompactPCI® Backplane Resources
  • PICMG® CompactPCI® 2.0 CPU card & system slot controller for J1 based 32-bit CompactPCI® systems
  • Support for up to seven CompactPCI® peripheral boards, 33/66MHz (PI7C9X112 PCIe to PCI bridge)
  • PICMG® CompactPCI® 2.30 J2 UHM connector according to CompactPCI® PlusIO **
  • J2 is assigned to 4 x PCIe® Gen3 8GT/s*, 4 x SATA 6G*, and 4 x USB2 ports (all derived from PCH)
  • J2 can be used to enable CompactPCI® Serial peripheral card slots for hybrid systems with a split backplane
  • Hybrid small system racks available (e.g. SRP-BLUBOXX)
  • J2 can be used alternatively for a rear I/O module
  • Custom specific rear I/O module design on request
  • J2 Connector option available - 64-bit system slot tolerant for legacy CompactPCI® 2.0 (Classic)
* CompactPCI® PlusIO specifies SATA 3G over J2. SATA 6G may be functional but is not guaranteed. The Marvell SATA controller port available via J2 is therefore configured for 3Gbps by default.
** In case of obsolescence, the J2 UHM connector will be replaced by the CompactPCI® 2.0 classic J2 connector. This may reduce high speed backplane transfer in particular applications (PCIe Gen1 2.5GT/s, SATA 1.5G). This does not affect peripherals attached via the P-HSE mezzanine connector.

Environmental & Regulatory
  • Designed & manufactured in Germany
  • ISO 9001 certified quality management
  • Long term availability
  • Rugged solution
  • Coating, sealing, underfilling on request
  • Lifetime application support
  • RoHS compliant 2002/95/EC
  • EN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1)
  • Operating temperature 0°C to +70°C
  • Operating temperature -40°C to +850°C (industrial temperature range) on request
  • Storage Temperature: -40°C to +85°C, max. Gradient 5°C/min
  • Humidity 5% ... 95% RH non Condensing
  • Altitude -300m ... +3000m
  • Shock 15g 0.33ms, 6g 6ms
  • Vibration 1g 5-2000Hz
  • MTBF 11.9 years

Applications
  • General industrial computing, ready for x86 based software
  • IIoT applications, edge computing, IIOT
  • Medium to high embedded CPU performance
  • CompactPCI® Classic and/or CompactPCI® Serial peripheral card expansion
  • Stand-Alone Computer (SAC)

PC7-FESTIVAL • Simplified Block Diagram

PC7-FESTIVAL • Simplified Block Diagram
Ordering Information
Please refer to List 21 for popular SKUs