EKF - Short Profile
EKF - Short Profile


SC3-LARGO

CompactPCI® Serial CPU Card
5th Generation Intel® Core™ i7-5xxx Processor
HTML documents available here

PDF documents available here

SC3-LARGO

Description

Ordering Information

Product Information

SC2 vs. SC3

Block Diagram

User Guide

Backplane Resources

Mezzanine Resources

Application Notes
Power Event (Power Down)
General Information
Concise

All You Need to Know

C4x Series Overview


Low Profile Mezzanine Storage Modules
C41 | C42 | C43 | C47 | C48
Side Boards +4HP +8HP
C32 | C44 | C45 | SCS


SC3-LARGO • 5th Generation Intel® Core™ CPU Card

SC3-LARGO • 4HP - 8HP - 12HP Assembly Options
Download area for drivers

Firmware

Firmware Update

Drivers

SC3-LARGO

Chipset | ME | GE(1) | GE(2-4) | Graphics | SATA | USB3

SCS-TRUMPET

Audio | SATA | USB3

Monitoring
SpeedFan | Cfg. Data

Board Support Packages
QNX | VxWorks

Subscription of the EKF NewsFlash, an E-Mail Letter with Announcements of Firmware Updates

E-Mail on Firmware Update
Subscription of the EKF NewsFlash, an E-Mail Letter with Announcements of Firmware Updates, English
E-Mail bei Firmware Update

Abonnement EKF NewsFlash, ein E-Mail Dienst mit Ankündigungen neuer Firmware Updates, Deutsch
Download a photo in print quality
Photo Gallery

With C4* Mezzanine Storage Module
(4HP/8HP Assemblies)

1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22

With Side Board SCS-TRUMPET
(8HP/12HP Assemblies)

1 | 2 | 3 | 4 | 5 | 6 | 7 | 8

Print Quality 300dpi 10x15cm .JPG ©EKF
If setup for non-tabbed browsing, images are displayed in a secondary browser window


SC3-LARGO

CompactPCI® Serial CPU Card
Powerful 5th Generation Intel® Core™ i7 Mobile Processor
Quad-Core • Up to 24GB DDR3L ECC Memory


The SC3-LARGO is a rich featured high performance 4HP/3U CompactPCI® Serial CPU board, equipped with a 5th generation Intel® Core™ mobile processor (Broadwell H quad-core). The SC3-LARGO front panel is provided with two Gigabit Ethernet jacks, two USB 3.0 receptacles, and two mDP connectors, compliant with the DisplayPort 1.2 standard for Multi-Stream-Transport (MST). Local expansion mezzanine cards are available for additional I/O.


The SC3-LARGO is equipped with up to 24GB Low Power RAM with ECC support. Up to 8GB memory-down are provided for rugged applications, and another 16GB maximum are available via the DDR3 ECC SO-DIMM socket. The on-board SATA 6G RAID controller allows for powerful mass storage solutions via the CompactPCI® Serial backplane. Low profile SSD mezzanine modules are available as on-board storage solution, in addition.

SC3-LARGO • 5th Generation Intel® Core™ i7 (Broadwell) Mobile Processor

SC3-LARGO • 5th Generation Intel® Core™ Processor


The SC3-LARGO is equipped with a set of local expansion interface connectors, which can be optionally used to attach a mezzanine side board. A variety of expansion cards is available, e.g. providing legacy I/O and additional PCI Express® based I/O controllers such as SATA, USB 3.0 and Gigabit Ethernet, and also a third video output.


Most mezzanine side cards can accommodate in addition a 2.5-inch drive. Typically, the SC3-LARGO and the related side card would come as a readily assembled 8HP unit. As an alternate, MicroSATA or mSATA SSD based low profile mezzanine mass-storage modules are available that fit into the SC3-LARGO 4HP envelope.

Feature Summary

General
  • CompactPCI® Serial (PICMG® CPCI-S.0) CPU card
  • Form factor single size Eurocard (board dimensions 100x160mm2)
  • Mounting height 3U
  • Front panel width 4HP (8HP/12HP assembly with optional mezzanine side card)
  • Front panel I/O connectors for typical system configuration (2 x USB3, 2 x Mini DisplayPort, 2 x GbE)
  • Backplane communication via PCI Express® Gen3, 6x SATA 6G, 1x SATA 3G, USB 3.0, Gigabit Ethernet
  • Local mezzanine expansion option (side card), COTS and custom specific boards
  • Heat spreader available for CoolConduct® technology heat exchanger systems (option)

Processor
  • 5th Generation Intel® Core™ CPU (Broadwell H)
  • i7-5850EQ • 4 Cores • 2.7GHz (TB 3.4GHz) • 47/37W TDP/cTDP • GT3e-6200 Intel® Iris™ Pro graphics 1GHz • 6MB LLC • vPRO™/AMT
  • i7-5700EQ • 4 Cores • 2.6GHz (TB 3.4GHz) • 47/37W TDP/cTDP • GT2-5600 Intel® HD graphics 1GHz • 6MB LLC • vPRO™/AMT

Firmware
  • Phoenix® UEFI (Unified Extensible Firmware Interface) with CSM*
  • Fully customizable by EKF
  • Secure Boot and Measured Boot supported - meeting all demands as specified by Microsoft®
  • Windows®, Linux and other (RT)OS' supported
  • Intel® AMT supported (disabled by default, must be enabled via BIOS setup)
* CSM (Compatibility Support Module) emulates a legacy BIOS environment, which allows to boot a legacy operating system such as DOS, 32-bit Windows and some RTOS'

Main Memory
  • Integrated memory controller up to 24GB DDR3L 1600 +ECC
  • DDR3L +ECC soldered memory up to 8GB
  • DDR3L +ECC SO-DIMM memory module socket up to 16GB

Performance Rating
  • Passmark 8.0 performance test (Windows 8.1/64, 16GB RAM, C47-MSATA mezzanine SSD storage module)
  • SC3-630D (i7-5700EQ): Passmark rating 2975, CPU rating 8620
  • SC3-830D (i7-5850EQ): Passmark rating 3271, CPU rating 9167

Graphics
  • Integrated HD Graphics Engine, 3 symmetric independent displays
  • 3D HW acceleration DX11.1, OpenCL 1.2, OpenGL 4.3, ES 2.0
  • HW media acceleration DXVA 2, VAAPI
  • HW video decode H264, SVC, AVC, MVC, MPEG-2, MJPEG, JPEG large frame support, VC-1, VP8
  • HW video encode H264, SVC, AVC, MVC, MPEG-2
  • Content protection PUMA, PAVP, HDCP
  • Front panel options: Dual Mini-DisplayPort (mDP) or single VGA connector
  • 3rd DisplayPort connector via mezzanine side card
  • DisplayPort™ 1.2 Multi-Stream Transport (MST) - display daisy chaining
  • Max Resolution 4096 x 2304 @60Hz (any DisplayPort), 1920 x 1200 (VGA)
  • 4k x 2k @24Hz supported for Blu-ray playback
  • Integrated audio

Networking
  • Up to 4 networking interfaces in total - 2 x front RJ45 GbE, 2 x backplane GbE via P6
  • 1000BASE-T, 100BASE-TX, 10BASE-T connections
  • Front port 1 - I217LM with Intel® AMT support
  • Front port 2 - Intel® I210-IT -40°C to +85°C operating temperature GbE NIC w. integrated PHY
  • Front port option M12 X-coded connectors (replacement for RJ45, requires 8HP front panel width)
  • IPv4/IPv6 checksum offload, 9.5KB Jumbo Frame support, EEE Energy Efficient Ethernet
  • IEEE 802.1Qav Audio-Video-Bridging (AVB) enhancements for time-sensivitive streams
  • IEEE 1588 and 802.1AS packets hardware-based time stamping for high-precision time synchronization
  • Backplane Gigabit Ethernet w. 2 x I210-IT NIC

Chipset
  • Intel® QM87 Lynx Point Platform Controller Hub (PCH)
  • 8 x PCIe Gen2 5GT/s
  • 4 x SATA 6G, 2 x SATA 3G
  • 10 x USB2, 4 x USB3
  • LPC, Audio, Legacy

On-Board Building Blocks
  • Additional on-board devices, PCIe® based
  • 3 x Gigabit Ethernet controllers Intel® I210IT
  • 1 x Gigabit Ethernet PHY Intel® I217LM
  • IEEE 1588-2008 Precision Time Protocol supported including PPS and PPM signals
  • PCIe Gen2 packet switch 16-lane 16-port PLX PEX8618
  • SATA 6G RAID controller Marvell® 88SE9230 ARM powered subsystem for host CPU offload

Security
  • Trusted Platform Module
  • TPM 2.0 for highest level of certified platform protection
  • Infineon Optiga™ SLB 9665 cryptographic processor
  • Conforming to TCG 2.0 specification
  • AES hardware acceleration support by 5th Gen processor series (Intel® AES-NI)

Front Panel I/O (4HP)
  • 2 x Gigabit Ethernet RJ45 (1 = PCH & I217LM - iAMT, 2 = I210IT)
  • 2 x DisplayPort (from processor integrated HD graphics engine, mDP style receptacles, optional cable connector retainer available)
  • 2 x USB 3.0

CompactPCI® Serial Backplane Resources
  • PICMG® CPCI-S.0 CPU card & system slot controller
  • 16 x PCIe Gen3 8GT/s (2 links x 8 for two fat pipe slots, derived directly from the Intel® Core™ CPU
  • 6 x PCIe Gen2 5GT/s (6 links x 1 for peripheral slots)
  • 2x SATA 6G & 1x SATA 3G (from QM87 PCH)
  • 4 x SATA 6G (Marvell hardware RAID controller)
  • 4 x USB2, 2 x USB3 (from PCH)
  • 2 x Gigabit Ethernet (I210IT networking controllers)

Local Expansion and Mass Storage Solutions
  • Mezzanine side card connectors for local expansion
  • P-EXP - USB 2.0 & Legacy (from PCH)
  • P-DP3 - 3rd DisplayPort video (from Intel® Core™ CPU)
  • P-HSE - 2 x SATA 6G, 1 x SATA 3G & 4 x USB 2.0 (from PCH)
  • P-PCIE - PCIe Gen2 5GT/s 1 link x 4 lanes (from on-board PCIe® switch)
  • 4HP Low profile mezzanine module options
  • CFast™ Card with C41-CFAST mezzanine module
  • SATA 1.8-Inch Solid State Drive with C42-SATA mezzanine module
  • Dual mSATA SSD with C47-MSATA mezzanine module
  • Triple M.2/NGFF SATA SSD 2230 - 2280 size with C48-M2 mezzanine module
  • Custom specific module design
  • 8HP/12HP Mezzanine side card options
  • SCS-TRUMPET - 3rd DisplayPort F/P connector, RS-232, 2 x USB3, on-board 2.5-Inch SATA SSD or 2 x M.2/NGFF SATA SSD module sockets 2230 - 2280
  • Variety of other side cards available
  • Custom specific side card design

Environmental & Regulatory
  • Suitable e.g. for industrial, transportation & instrumentation applications
  • Designed & manufactured in Germany
  • ISO 9001 certified quality management
  • Long term availability
  • Rugged solution
  • Coating, sealing, underfilling on request
  • Lifetime application support
  • RoHS compliant
  • Operating temperature 0°C to +70°C
  • Operating temperature -40°C to +85°C (industrial temperature range) on request
  • Storage temperature -40°C to +85°C, max. gradient 5°C/min
  • Humidity 5% ... 95% RH non condensing
  • Altitude -300m ... +3000m
  • Shock 15g 0.33ms, 6g 6ms
  • Vibration 1g 5-2000Hz
  • MTBF 11.7 years (SC3-680D)
  • EC Regulatory EN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1)

RT OS Board Support Packages & Driver
  • LynxOS - on request
  • On Time RTOS-32 - on request
  • OS-9 - on request
  • QNX
  • Real-Time Linux (RT Patch) - on request
  • RTX - on request
  • VxWorks 5.5 & 6.9 - on request
  • VxWorks 7.0 - under development
  • Others - on request

all items are subject to change w/o further notice


While mechanically compliant to CompactPCI® Classic, CompactPCI® Serial (PICMG® CPCIS.0) defines a completely new card slot, based on PCI Express®, SATA, Gigabit Ethernet and USB serial data lines. Up to 6 high-speed backplane connectors P1 - P6 are provided on a system slot controller such as the SC3-LARGO, which can be considered as a root hub with respect to most signal lines. A passive backplane is used for distribution of a defined subset of I/O channels from the system slot to each of up to eight peripheral slots in a CompactPCI® Serial system.


Most CompactPCI® Serial peripheral slot cards require only the backplane connector P1, which comprises PCIe, SATA and USB signals, resulting in a concise and inexpensive peripheral board design. More powerful peripheral cards profit from so called Fat Pipe slots (PCIe x 8). The SC3-LARGO is a native CompactPCI® Serial CPU card, suitable for usage in a pure CPCI Serial environment. Due to its generous backplane capabilities (22 x PCI Express® lanes, 6 x USB, 7 x SATA RAID, 2 x GbE), very powerful industrial systems can be built.

SC3-LARGO with C48-M2 SATA SSD Storage Module

SC3-LARGO with C48-M2 Dual SATA SSD Storage Module

SC3-LARGO • Simplified Block Diagram

SC3-LARGO • Simplified Block Diagram

SC3-LARGO w. SCS-TRUMPET Mezzanine Side Card 8HP Assembly

SC3-LARGO w. SCS-TRUMPET Mezzanine Side Card 8HP Assembly

SC3-LARGO w. CoolConduct® Heat Spreader for Industrial High Performance Computing (Multiprocessing Systems)

SC3-LARGO w. CoolConduct® Heat Spreader for Multiprocessing Systems
Ordering Information
Please refer to List 21 for popular SC3-LARGO SKUs
For popular mezzanine side cards please refer to List 20
EKF is an ISO-9001 certified company
EKF Elektronik GmbH • Philipp-Reis-Str. 4 • 59065 Hamm • Germany
Phone +49 (0)2381/6890-0 • Fax +49 (0)2381/6890-90 • E-Mail