EKF - Short Profile
EKF - Short Profile


SXP-JAM & PCX-JAM

CompactPCI® Serial to CompactPCI® Classic Bridge

Dual Board Assembly
HTML documents available here

PDF documents available here

SXP-JAM & PCX-JAM

Description

Ordering Information

Product Information

Block Diagram SXP-JAM

Block Diagram PCX-JAM

General Information
CPCI®  Serial   PlusIO


Download area for firmware & drivers

Drivers

Ethernet | USB
Download a photo in print quality
Photo Gallery


© EKF • Images are displayed in a secondary browser tab or window


SXP-JAM • PCX-JAM

CompactPCI® Backplane Coupler

Serial to Classic Bridge • Dual Card Assembly


Available as companion boards, the PCX/SXP-JAM assembly is a bridging and expansion solution for CompactPCI® Serial systems with need for integrating CompactPCI® Classic cards. While the SXP-JAM is a CompactPCI® Serial board which resides on the outmost peripheral slot of the Serial backplane, the PCX-JAM is configured as system slot card for the CompactPCI® Classic backplane. Both boards are connected together by a mezzanine stacking connector, which is used to forward a PCI Express® link from the SXP-JAM to a PCI® bridge on the PCX-JAM. Mounted together in a 4HP pitch, the PCX/SXP-JAM boards expand a modern CompactPCI® Serial system by up to seven CompactPCI® Classic card slots.


When using either two adjacent separate standard backplanes CompactPCI® Classic and CompactPCI® Serial, or alternatively a custom hybrid backplane, both PCX/SXP-JAM cards will be aligned together in a 4HP pitch (8HP front panel width assembly). The PCX-JAM resides left of the SXP-JAM, requiring the systems slots of both backplane segments to be right aligned.

In addition to the 32bit 33/66MHz PCI® bridge, the PCX-JAM is provided with three RJ45 Gigabit Ethernet jacks (Intel® I210-IT controllers) for industrial networking, and three USB 3.0 Type-A receptacles (TI USB controller). Further more, the SXP-JAM can accommodate an SATA SSD module, size M.2 up to 22110.


SXP-JAM & PCX-SXP-JAM • Photo Soon Here

Feature Summary

General
  • Dual board assembly
  • PCX-JAM is a CompactPCI® (PICMG® CPCI 2.0) system slot board
  • SXP-JAM is a CompactPCI® Serial (PICMG® CPCI-S.0) peripheral card
  • Form factor single size Eurocard (board dimensions 100x160mm2)
  • Mounting height 3U
  • Common front panel width 8HP for the assembly of both cards
  • High speed mezzanine connectors between both cards

PCX-JAM
  • CompactPCI® Classic system slot board (replaces CompactPCI® CPU card)
  • Must reside rightmost on a CompactPCI® backplane which has its system slot right aligned
  • CompactPCI® backplane communication via J1 and J2 hard metric connectors, 32-bit support
  • PCI Express® to PCI® bridge PI7C9X112, 3.3V or 5V VIO
  • Support for up to 7 CompactPCI® peripheral cards
  • On-board PCI Express® switch PI7C9X2G606PR
  • +5V only board design for low cost CompactPCI® system power supply
  • PCX-JAM can deliver +3.3V to CompactPCI® peripheral boards
  • Added value front panel I/O connectors (3 x USB3, 3 x GbE)
  • On-board 3 x I210-IT Gigabit Ethernet networking controllers
  • On-board USB 3.0 quad port controller TUSB7340

SXP-JAM
  • CompactPCI® Serial peripheral card, backplane communication via P1 connector
  • Must reside leftmost on a CompactPCI® Serial backplane with its system slot right aligned
  • PCI Express® x1 or x4 enabled peripheral card slot required (Gen2 or Gen3 recommended)
  • PCIe® x1 Gen2 sufficient for operation w. PCX-JAM
  • PCIe® x4 Gen3 path provided for future projects
  • On-board PCIe® redrivers for optimum signal integrity
  • Option on-board M.2 SATA SSD socket (SATA enabled peripheral card slot required)
  • Option CompactPCI® Serial backplane connector P6 populated for even more mechanical ruggedness

Front Panel I/O
  • 3 x Gigabit Ethernet RJ45 (3 x I210-IT)
  • 3 x USB 3.0 Type-A (TUSB7340)

Networking
  • Three networking interface controllers (NIC), PCIe® based
  • 1000BASE-T, 100BASE-TX, 10BASE-T connections
  • Intel® I210-IT -40°C to +85°C operating temperature GbE controllers w. integrated PHY
  • IPv4/IPv6 checksum offload, 9.5KB Jumbo Frame support, EEE Energy Efficient Ethernet
  • IEEE 802.1Qav Audio-Video-Bridging (AVB) enhancements for time-sensivitive streams
  • IEEE 1588 and 802.1AS packets hardware-based time stamping for high-precision time synchronization
  • Three GbE ports via RJ45 front panel jacks

USB
  • TI quad port USB controller, PCIe® based
  • USB 3.1 Gen1 (formerly USB 3.0) 5Gbps SuperSpeed
  • Three front panel Type-A connectors

PCI Express®
  • PCIe® Gen2 packet switch PI7C9X2G606PR (6-port, 6-lane) located on PCX-JAM
  • Upstream port x1 to CompactPCI® Serial backplane via SXP-JAM P1 connector
  • 2 x Gigabit Ethernet controllers Intel® I210IT (front panel)
  • 3 x downstream ports x1 to Gigabit Ethernet controllers Intel® I210IT (front panel)
  • Downstream port x1 to USB controller TUSB7340
  • Downstream port x1 to PCI® bridge PI7C9X112 (7 x PCI 33/66MHz CompactPCI® peripheral slots)
  • PCIe® Gen3 redrivers on SXP-JAM

SSD
  • M.2 SATA socket (B-key), suitable for an SATA based SSD module
  • Any size 2230 - 22110
  • Located on the SXP-JAM
  • SATA via CompactPCI® Serial backplane (SXP-JAM P1 connector)

Environmental & Regulatory
  • Designed & manufactured in Germany
  • ISO 9001 certified quality management
  • Long term availability
  • Rugged solution
  • Coating, sealing, underfilling on request
  • Lifetime application support
  • RoHS compliant
  • Operating Temperature: -40°C to +85°C (industrial temperature range)
  • Storage Temperature: -40°C to +85°C, max. Gradient 5°C/min
  • Humidity 5% ... 95% RH non Condensing
  • Altitude -300m ... +3000m
  • Shock 15g 0.33ms, 6g 6ms
  • Vibration 1g 5-2000Hz
  • MTBF tbd years
  • EC Regulatory EN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1)

Applications
  • Legacy hardware integration into modern CompactPCI® Serial systems
  • Enables special PCI® functions w/o an equivalent PCIe® solution
  • Replacement solution for obsolete CompactPCI® Classic CPU cards
  • Modern CompactPCI® Serial CPU card controls both backplane segments
  • Useful front I/O in addition to basic backplane bridge function
all items are subject to changes

SXP-JAM • Simplified Block Diagram

SXP-JAM • Simplified Block Diagram

PCX-JAM • Simplified Block Diagram

PCX-JAM • Simplified Block Diagram
Ordering Information
Please refer to List 21 for popular PCX-JAM SKUs
EKF is an ISO-9001 certified company
EKF Elektronik GmbH • Philipp-Reis-Str. 4 • 59065 Hamm • Germany
Phone +49 (0)2381/6890-0 • Fax +49 (0)2381/6890-90 • E-Mail