Feature Summary XV1
|
Form Factor
|
144mm x 97mm Small Size Carrier Board & Evaluation Platform
|
COM Express™
|
Suitable for PICMG COM Express R1.0 (COM.0) Basic Module (125x95mm2), Pin-out Type 2
|
CompactFlash™
|
Socket for CF storage card, operated in 'True IDE Mode'
|
ExpressCard™
|
Slot for a 34mm style ExpressCard, USB and PCIe support
|
Option
PCI Express® Mini Card
|
- Either one or two sockets for PCI Express® Mini Cards 30.00mm x 50.95mm
- For USB and PCI Express based Mini Cards
- SIM Card holder associated with PCIe Mini Card Socket 2 for GSM applications, e.g. UMTS/HSPA & EDGE/GPRS modem
- On-Board SMA/RP antenna connector combined with U.FL coax receptacle, to be used for wireless applications with either one Mini Card
- Socket 1 suitable for all kind of PCIe Mini Cards, e.g. WLAN/WiFi, WAN, GSM, TV, Turbo Memory (Intel Robson)
- Socket 2 (option) suitable for USB type Mini Cards only
|
Option
USB Flash Drive
|
- Up to four pin headers for industrial grade, low profile USB Solid State Drives (SSD), 36.9mm x 26.6mm modules
- Variety of industrial grade module vendors e.g. Intel, STEC, Sandisk, SiliconSystems
- Rugged solution, fixed by retention screw
|
Connectivity - Gigabit
Ethernet
|
- On-Board PCIe Gigabit Ethernet controller (Intel)
- COM Express Module Ethernet port
- Dual Gigabit Ethernet jack RJ-45, integrated LEDs
|
Connectivity -
USB
|
- 4 x USB2.0 Type A receptacle for external usage
- 4 x USB2.0 ports for internal usage (USB SSD, PCIe Mini Card, ExpressCard)
|
Connectivity -
Video
|
- DVI-I Connector for dual-screen video (splitter cable required)
- Digital video output (use straight DVI cable assembly)
- Analog video output (use DVI to RGB cable assembly)
- Option D-Sub 15 VGA connector - replaces DVI receptacle
- On-Board PanelLink transmitter (SDVO to DVI)
|
Storage -
SATA
|
- Up to 4 on-Board SATA connectors
- SATA1 & SATA2 for external usage (eSATA shielded receptacles)
- SATA3 for latching SATA cable assembly (7-position)
- Option SATA4 for direct attachment of a 2.5-inch SATA hard disk drive (22-position data + power)
|
Option
Firmware Hub
|
- On-Board secondary LPC Firmware Hub, for alternate BIOS or custom specific code
- Boot selection by jumper settings (JBS), jumper set enables boot from secondary FWH
- Phoenix BIOS custom specific modifications can be offered by EKF
|
Drivers
|
Intel networking drivers
|
Supply Voltage
|
- +12V nominal (maximum allowable voltage tolerances and current consumption mainly as established by the COM Express Module)
- Other voltage ranges on request (on board DC/DC module option)
- 3.5mm Molex Eurostyle terminal block, for matching horizontal power plug
with retention screws (Molex 0395040002, also available from EKF as part no. 245.35.02.20)
|
Environmental Conditions
|
- Operating temperature: 0°C ... +60°C
- Storage temperature: -40°C ... +85°C, max. gradient 5°C/min
- Humidity 5% ... 95% RH non condensing
- Altitude -300m ... +3000m
- Shock 15g 0.33ms, 6g 6ms
- Vibration 1g 5-2000Hz
|
MTBF
|
tbd
|
EC Regulations
|
- EN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1)
- 2002/95/EC (RoHS)
|