EKF - Short Profile
EKF - Short Profile
SC5-FESTIVAL

CompactPCI® Serial CPU Card

Intel® Mobile Workstation Processor Xeon® E3 v6 Family

7th Generation Intel® Core™ Processor (Kaby Lake-H)

SC5-FESTIVAL

Description

Ordering Information

Product Information

Block Diagram

User Guide

Backplane Resources

Mezzanine Resources

New Mezzanine Connectors

Application Notes
Power Event (Power Down)

General Information
CompactPCI® Serial

Low Profile Mezzanine Modules
S20 | S40 | S42 | S80 | S82 | C48
Side Cards
SCL | SCX | SCZ




Firmware

Update

Drivers

ME | GE(1) | GE(2) | Graphics | SATA | USB3
Board Support Packages

QNX


Photo Gallery

1 | 2 | 3

Low Profile Mezzanine Modules

1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14

Side Cards

1 | 2 | 3 | 4 | 5 | 6

Option M12 Gigabit Ethernet

1 | 2 | 3

© EKF • Images show up in a secondary browser tab or window


SC5-FESTIVAL

CompactPCI® Serial CPU Card

Intel® XEON® E3 v6 Mobile Workstation Processor or 7th Generation Intel® Core™ Processor


The SC5-FESTIVAL is a rich featured high performance 4HP/3U CompactPCI® Serial CPU board, equipped with an Intel® Xeon® E3 familiy mobile workstation processor (Kaby Lake Halo platform) for demanding applications. For scalability, the SC5-FESTIVAL is also available with a 7th Generation Intel® Core™ Kaby Lake processor.

The SC5-FESTIVAL front panel is provided with two Gigabit Ethernet jacks, two USB 3.0 receptacles, and two DisplayPort connectors. In addition, up to two USB Type-C front panel receptacles are available as an option, one of them usable alternatively as (third) DisplayPort.

On-board mass-storage solutions are based on a low profile mezzanine expansion card, which accommodates two M.2 style SSD modules. One of the M.2 sockets is suitable for a fast NVMe (PCIe Gen3 x 4) module, and the other for a low cost SATA type M.2 SSD.


The SC5-FESTIVAL is equipped with up to 32GB DDR4 RAM with ECC support. Up to 16GB memory-down are provided for rugged applications, and another 16GB are available via the DDR4 ECC SO-DIMM socket.

The powerful Xeon® E3-1500 v6 series processor is accompanied by the CM238 mobile PCH, for a maximum of high speed I/O resources (e.g. PCI Express®, SATA, USB). Thus, 22 PCIe lanes are available for backplane use, and up to 8 lanes for local mezzanine expansion.

The SC5-FESTIVAL is provided with an on-board SATA hardware RAID controller, enabling high-capacity mass storage solutions across the CompactPCI® Serial backplane.

As an option, up to eight Gigabit Ethernet Ports are available via the backplane connector P6 (low profile mezzanine expansion card).


SC5-FESTIVAL

SC5-FESTIVAL • High Performance CPU Board

Feature Summary

General
  • CompactPCI® Serial (PICMG® CPCI-S.0) CPU card
  • Form factor single size Eurocard (board dimensions 100x160mm2)
  • Mounting height 3U
  • Front panel width 4HP (8HP/12HP assembly with optional mezzanine side card)
  • Front panel I/O connectors for typical system configuration (2 x USB3, 2 x DisplayPort, 2 x GbE)
  • Backplane communication via PCI Express® Gen3, SATA 6G, USB 3.0, Gigabit Ethernet
  • Local mezzanine expansion option, COTS and custom specific boards

Processor
  • Intel® Kaby Lake-H mobile platform with ECC (CM238 mobile workstation PCH)
  • Intel® Xeon® processor E3 v6 family (mobile workstation)
    • Xeon E3 1505M v6 • 3/4GHz • 8M • 4C/8T • DDR4 2400 ECC • 45/35W • GT2 - P630 • vPRO™
    • Xeon E3 1505L v6 • 2.2/3GHz • 8M • 4C/8T • DDR4 2400 ECC • 25W • GT2 - P630 • vPRO™
    • Xeon E3 1501M v6 • 2.9/3.6GHz • 6M • 4C/8T • DDR4 2400 ECC • 45/35W • GT2 - P630 • vPRO™
    • Xeon E3 1501L v6 • 2.1/2.9GHz • 6M • 4C/8T • DDR4 2400 ECC • 25W • GT2 - P630 • vPRO™
  • 7th Generation Intel® Core™ mobile processor
    • i3 7100E • 2.9GHz • 3M • 2C/4T • DDR4 2400 ECC • 35W • GT2 - 630
    • i3 7102E • 2.1GHz • 3M • 2C/4T • DDR4 2400 ECC • 25W • GT2 - 630

Firmware
  • Phoenix® UEFI (Unified Extensible Firmware Interface) with CSM*
  • Fully customizable by EKF
  • Secure Boot and Measured Boot supported - meeting all demands as specified by Microsoft®
  • Windows®, Linux and other (RT)OS' supported
  • Intel® AMT supported for Intel® Xeon® E3 v6 (disabled by default, must be enabled via BIOS setup)
* CSM (Compatibility Support Module) emulates a legacy BIOS environment, which allows to boot a legacy operating system such as DOS, 32-bit Windows and some RTOS'

Main Memory
  • Integrated memory controller up to 32GB DDR4 2400 ECC +ECC
  • DDR4 +ECC soldered memory up to 16GB
  • DDR4 +ECC SO-DIMM memory module socket up to 16GB

Graphics
  • Integrated HD Graphics Engine, 3 symmetric independent displays
  • 3D HW acceleration DirectX12, OpenCL 2.x, OpenGL 4.3/4.4, ES 2.0
  • HW video decode/encode HEVC10b 10-bit, VP9 10-bit, JPEG
  • HDR (High Dynamic Range) Rec. 2020 Wide Color Gamut
  • Content protection
  • UHD premium content playback
  • Front panel options: Dual DisplayPort (DP) connectors
  • 3rd DisplayPort optional via Type-C connector on low profile mezzanine card
  • Max resolution 4096 x 2304 @60Hz (any DisplayPort, concurrent operation)
  • DisplayPort™ 1.2 Multi-Stream Transport (MST) - display daisy chaining
  • MST max resolution via single DP connector 2880x1800@60Hz (2 displays), 2304x1440@60Hz (3 displays)
  • Integrated audio (3 independent audio streams)

Networking
  • Up to 10 networking interfaces in total - 2 x front RJ45 GbE, option 8 x backplane or 4 x M12-X front
  • 1000BASE-T, 100BASE-TX, 10BASE-T connections
  • Front port 1 - I219LM with Intel® AMT support
  • Front port 2 - Intel® I210-IT -40°C to +85°C operating temperature GbE NIC w. integrated PHY
  • IPv4/IPv6 checksum offload, 9.5KB Jumbo Frame support, EEE Energy Efficient Ethernet
  • IEEE 802.1Qav Audio-Video-Bridging (AVB) enhancements for time-sensivitive streams
  • IEEE 1588 and 802.1AS packets hardware-based time stamping for high-precision time synchronization
  • Backplane Gigabit Ethernet option w. S80-P6 mezzanine module - Marvell Peridot switch
  • Backplane Gigabit Ethernet option w. S82-P6 mezzanine module - 4 x Intel® I210-IT NIC
  • Option front panel M12 X-coded GbE ports with SCL-RHYTHM side card (8HP front panel width)

Chipset
  • Intel® CM238 Mobile Workstation Platform Controller Hub (PCH)
    • PCIe Gen3 8GT/s
    • SATA 6G
    • USB3
    • GbE
    • LPC, Audio, Legacy

On-Board Building Blocks
  • Additional on-board devices, PCIe® based
  • 1 x Gigabit Ethernet controller Intel® I210IT
  • 1 x Gigabit Ethernet PHY Intel® I219LM
  • IEEE 1588-2008 Precision Time Protocol supported including PPS and PPM signals
  • SATA 6G RAID controller Marvell® 88SE9230 ARM powered subsystem for host CPU offload

Security
  • Trusted Platform Module
  • TPM 2.0 for highest level of certified platform protection
  • Infineon Optiga™ SLB 9665 cryptographic processor
  • Conforming to TCG 2.0 specification
  • AES hardware acceleration support (Intel® AES-NI)

Front Panel I/O (4HP)
  • 2 x Gigabit Ethernet RJ45 (1 = PCH & I219LM - Intel® AMT, 2 = I210IT)
  • 2 x DisplayPort (from processor integrated HD graphics engine, standard latching DP receptacles
  • 2 x USB 3.0
  • Option 2 x Type-C USB 3.1 Gen1 (requires low profile mezzanine expansion card w. front panel I/O)
  • Support for Type-C locking plugs (dual screw) according to the 'Locking Connector Spec. Rev. 1.0'
  • Option DisplayPort Alt Mode on lower Type-C connector (3rd video monitor output)

CompactPCI® Serial Backplane Resources
  • PICMG® CPCI-S.0 CPU card & system slot controller
  • 16 x PCIe Gen3 8GT/s (2 links x 8 for two fat pipe slots, derived directly from the Intel® Xeon® or Core™ CPU
  • 6 x PCIe Gen3 8GT/s (6 links x 1 for peripheral slots)
  • 2 x SATA 6G (from CM238 PCH)
  • 4 x SATA 6G (Marvell hardware RAID controller)
  • 5 x USB2, 3 x USB3 (from CM238 PCH)
  • Option 8 x Gigabit Ethernet Marvell 88E6390 switch, requires S80-P6 low profile mezzanine expansion card
  • Option 4 x Gigabit Ethernet Intel® I210-IT NIC, requires S82-P6 low profile mezzanine expansion card

Local Expansion & Mezzanine Mass Storage Options
  • Mezzanine side card connectors for local expansion
  • Low profile mezzanine modules available (4HP front panel) and also side cards (8HP F/P assembly)
  • P-EXP - Legacy (from PCH)
  • P-HSE1 - configurable as 4 x SATA 6G or 4 x PCIe (from CM238 PCH), 1 x USB3
  • P-HSE2 - 4 x PCIe (from CM238 PCH) & 3rd DisplayPort (from CPU)
  • 4HP Low profile mezzanine module preferred options:
  • C47-MSATA Mezzanine module - 2 x mSATA SSD sockets
  • C48-M2 Mezzanine module - 2 x M.2 2280 SATA SSD sockets
  • S20-NVME Mezzanine module - 1 x M.2 2280 NVMe SSD socket, 1 x Type-C USB F/P connector
  • S40-NVME Mezzanine module - 1 x M.2 2280 NVMe SSD socket, 1 x M.2 2280 SATA SSD socket, 2 x Type-C USB F/P Connector (1 connector enabled for DisplayPort alternate mode)
  • S80-P6 Mezzanine module - 1 x M.2 2280 NVMe SSD socket, 8 x Gigabit Ethernet via P6 backplane connector (TSN/AVB switch based solution)
  • S82-P6 Mezzanine module - M.2 NVMe SSD & 4 x GbE NIC via P6 backplane connector
  • Custom specific storage & I/O mezzanine module design
  • 8HP/12HP Mezzanine side card options
  • SCL-RHYTHM Quad port GbE NIC, front panel M12 X-coded receptacles, dual M.2 (NVMe/SATA) SSD
  • SCZ-NVM Dual M.2 NVMe SSD, quad UART
  • P01-M12 Replacement for RJ45 GbE jacks by M12-X receptacles
  • Custom specific side card design - I/O and storage

Environmental & Regulatory
  • Suitable e.g. for industrial, transportation & instrumentation applications
  • Designed & manufactured in Germany
  • ISO 9001 certified quality management
  • Long term availability
  • Rugged solution
  • Coating, sealing, underfilling on request
  • Lifetime application support
  • RoHS compliant
  • Operating temperature 0°C to +70°C
  • Operating temperature -40°C to +85°C (industrial temperature range) on request
  • Storage temperature -40°C to +85°C, max. gradient 5°C/min
  • Humidity 5% ... 95% RH non condensing
  • Altitude -300m ... +3000m
  • Shock 15g 0.33ms, 6g 6ms
  • Vibration 1g 5-2000Hz
  • MTBF 21.2 years
  • EC Regulatory EN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1)

RT OS Board Support Packages & Driver
  • LynxOS - on request
  • On Time RTOS-32 - on request
  • OS-9 - on request
  • QNX
  • Real-Time Linux (RT Patch) - on request
  • RTX - on request
  • VxWorks 5.5 & 6.9 - on request
  • VxWorks 7.0 - on request
  • Others - on request

SC5-FESTIVAL • Simplified Block Diagram

SC5-FESTIVAL • Simplified Block Diagram
Ordering Information
Please refer to List 21 for popular SKUs